Remote Control Planes Radio Control Toys RC Planes

Mini Saturn 3D F3A RC Airplane EPO Airplane 22.8 inch WingSpan

admin — Sun, 14 Apr 2013 04:24:18 +0000

Finally a mini sized 3D plane made with EPO foam, yes ill repeat myself...EPO. As most RC pilots know, almost every micro or mini 3d plane or even pattern birds have been molded or cut with EPP which is light in weight but flexes during flight. Take a look at the control surfaces, especially on the ailerons... Lets talk about the motor mount, again a very first and unique mount that hugs the nose keeping motor from shifting. Although this is a profile plane, the small hatch above the nose is magnetic and slightly extruded to hide your electronics, simply a beautiful design. This model is plug and fly, the servos the motor and the speed controller is pre installed, so the only thing needed is your own radio and a small 2 sell lipo battery at 300mAh. Features: Easy to build Powerful brushless 2S power system Light density EPO foam construction..30% lighter than standard EPO Plug and Fly version with motor ESC and servos Large control surfaces ideal for aerobatic and 3D flight Specs: Wingspan: 580mm Servo: 2.5g micro x 3 (included) Motor: 1306-10 3100KV (included) Flying Weight: 120~140g Length: 690mm ESC: 6A (included) Propeller: GWS 6030 (included) Included: Mini Saturn Airplane (PNF) All necessary hardware manual Required: 4CH transmitter and receiver 2S 7.4V 200~300mAh lipoly battery

Opteryx Micro DLG HLG SAL Balsa RC Glider

admin — Wed, 20 Jun 2012 20:54:08 +0000

The very first in its size and class, the Opteryx Micro DLG RC Plane stands at 1.3oz ( 36 grams ) with a wing span of only 22" inches, its the smallest balsa DLG glider that will take new heights, Literally . Small enough to fit in your palm, yet strong enough for the hardest throws, the Opteryx DLG glider is a streamlined design with reinforced carbon fiber running across the wings all the way to the launch peg. Easy assembly is the beauty of this micro rc bird with very few parts, it should take no more than an hour to assemble. All parts are laser cut using the finest balsa wood and birch plywood, carbon fiber pushrods, peg and reinforced carbon fiber tubes within each wing, you can hand launch this micro RC bird like glider over 100 feet and glider her right in your palm or catch thermals and fly for 30 minutes, yes 30 minutes with just one battery which is included in the kit. With detailed instructions, you simply lay each peace on the plan and use think CA glue to join all the parts like a puzzle. The Opteryx DLG has incredibly tight handling with low wing loading which performs beautifully from 30 minute constant thermal flight to slope gliding. Launch Peg can be installed for left handed or right handed throws. Specs: 22" inch wing span AUW ( total weight ) 1.4oz or 40 grams 100Mah 1S lipo 2X Micro 1.7gram servos 4Ch Micro 2.4Ghz Receiver 2 grams Kit Includes: Laser cut balsa and birch wood Hollow Carbon rods 2x for the wings 1S 100mAh Lipo Carbon push rods Launch Peg 4x Shrink Tubes 4x Z bends 2x control horns Coverite Microlite Transparent Covering sheet ( choose your color below ) Step by Step instructions ( total installation time 1 hour, depending on experience ) Required: 2x micro servos 1x Micro Receiver/Transmitter Medium CA glue (crazy glue) Trim Iron ( heat iron to cover wings ) http://www3.towerhobbies.com/cgi-bin/WTI0001P?I=LXB365&P=8 Your own transmitter Coverite 21st Century Microlite Transparent Yellow covering

United States Orders

International Orders

Kit requires assembly

(RTF) Ready to fly version comes with servos built in, receiver, entire kit is covered ready to fly. You will need a Spektrum Transmitter.

NOTE: Tracking number is not included on international orderes due to the the high price. ($30)

Micro Flying Wing the Flash Delta Worlds Smallest Flying RC Wing

admin — Fri, 20 Apr 2012 03:05:45 +0000

Introducing the worlds smallest, fastest and most stable micro flying wing, the Flash. At only 20″ inch wing span, this little wing is a first in its size. I am not claiming it is the very first 20″ flying wing, but i am guaranteeing this wing is the very first in its size to out perform [...]

Sukhoi SU-35 Thrust Vectoring Jet Electric twin engine

admin — Mon, 19 Mar 2012 07:45:34 +0000

Whos got the need for some low inverted thrust vectoring with this wicked Sukhoi SU-35 with a 1080mm wingspan, its a single seater fighter jet from the 1980 that outperformed any jet fighter with is ability to do thrust vectoring and with its twin engine for super maneuverability and aerodynamic look. This awesome looking highly scale twin 70mm EDF model fro Hobby King performs as good as the Su-35, it has a superb military look with gray and dark blue shades that of the brilliant military paint scheme, detailed pilot and scale decals, this famous jet fighter will tear open the sky. Best part of all, can you say " servoless retracts"....go on say it outloud.... a great function as we know servo retracts have the tendency to get stuck or strip and even add extra weight. The SU-35 Sukhoi has greater than a 1:1 power-to-weight ratio allowing for the most radical speed of flight characteristics! Running a 6S lipo which will provide 24volts of electrons powering up your twin EDF brushless motor. Here are some pictures of the Sukhoi SU-35 Thrust Vectoring Jet Electric twin engine

Micro Funjet Radjet 16 inch Wingspan Small Fast Electric Plane

admin — Mon, 27 Feb 2012 19:56:59 +0000

At first glance, this jet looks like the famous micro jet from multiplex which has been discontinued for many years….The MicroJet had a wingspan of 26 inches, extremely small jet wen it comes to radio control, the smaller the jet, the harder it becomes to control the plane, this was not the case with the [...]

Darkwing FPV Drone Fiberglass Composite Electric Flying Wing

admin — Tue, 21 Feb 2012 02:25:26 +0000

I would love to call this the Bat Wing, but Darkwing seems to fit well on this wicked FPV drone flying wing by HK. A wing span of 1727mm, its a perfect design for stability and enough wing surface to keep this beautiful fiberglass composite flying wing sky high. The fuselage and winglets are made [...]

Slick 360 3D RC Aerobatic balsa model from HK

admin — Wed, 01 Feb 2012 20:28:03 +0000

Extra Extra, read all about it, no this is not an Extra 3D but a fabulous slick and an eye candy of a plane, the Slick 360 3D with a 51" inch wing span, beautiful orange gray and white decals, one hot aerobatic RC model designed for extreme 3D aerobatics, gosh do I want this plane, i just wish it was a 40" wingspan so i would be able to fit it in my car. Take a look at the cowl, canopy and wheel pants as they have been finished in a deep gloss paint, dont you just want to take a bite out of it. In there own words: "The H-King Slick 360 performs every inch as good as it looks, naturaly it makes for a great sport plane but it would be fair to say that hardcore 3D is what the Slick has been designed for. The precision of the airframe, stunning looks, top line quality and amazing feather weight specs make the Slick 360 a must have plane for all aerobatic and 3D pilots!" Now for those who are looking to purchase the precision aerobatics Extra MX which is priced at around $300 with shipping plus the worlds most unsatisfying customer service, think twice. The Slick 360 3D is priced at $114 from Hobby King, a price you cannot beat although the wingspan is 7" shy of the MX. One feature to note on this slick 360 plane is the elevator, which has an airfoil, this is a trait you find in PA planes, even more of a reason to stay away from precision aerobatics. Here are the specs: Features: Top quality construction and covering Ultra light weight but strong airframe high quality covering Full airfoil empenage Excellent colour scheme for easy orientation Stunning 3D capability Specs: Wingspan: 1300mm Length: 1250mm Wing Area: 34.2dm2 Dry Weight: 890g (inc all hardware) Flying Weight: 1300g~1500g (Approx) Requires: Your own 4~6 Channel TX/RX 35mm Brushless Outrunner Motor 40A~60A ESC 4 x Digital High Torque 12g servo 2200mAh~2650mAh 4s Lipoly Battery 50mm Spinner UBEC (Optional) Here are some pictures of the Slick 360 3D plane.

1/16 Brushless 4WD Mini Rally RC Car Fully adjustable suspension

admin — Tue, 24 Jan 2012 00:13:16 +0000

I know my blog is mostly based on toys that fly, but truthfully, back in 1987 was when i first got into the radio control hobby with my very own Tamiya Frogger Remote Control Car with a Tamiya RX-54050 brushed motor, gosh good old days. In any case, feast your eyes on this new 1/16 [...]

Mini-Air Extra 300 3D Aerobatic RC plane Kit

admin — Thu, 19 Jan 2012 20:38:33 +0000

Finally, an affordable mini Extra 300 Kit by NitroPlanes, great for those who have an extra AR6400 from an older crashed model. At $35 its a steal, or a deal if you will. Although i have not seen this model in action, i can safely assume it will fly like the micro version of the [...]

ParkZone Micro Stryker Brushless Delta Wing 180

admin — Thu, 19 Jan 2012 00:24:03 +0000

Just when i had an idea of creating a micro wild wing, i noticed ParkZone beat me to it. The very slick and micro Stryker, using a 180 size brushless motor which is around 10 grams, spinning at 3000Kv on a 3.75×3 propeller, this little guy flies great, of course with a hefty price tag [...]