Mini Saturn 3D F3A RC Airplane EPO Airplane 22.8 inch WingSpan

13 Apr

Posted by admin as Mini Saturn 3D F3A RC Airplane EPO Airplane 22.8 inch WingSpan

Finally a mini sized 3D plane made with EPO foam, yes ill repeat myself…EPO. As most RC pilots know, almost every micro or mini 3d plane or even pattern birds have been molded or cut with EPP which is light in weight but flexes during flight.
Take a look at the control surfaces, especially on the ailerons…

Lets talk about the motor mount, again a very first and unique mount that hugs the nose keeping motor from shifting. Although this is a profile plane, the small hatch above the nose is magnetic and slightly extruded to hide your electronics, simply a beautiful design.

This model is plug and fly, the servos, motor and the speed controller is pre installed, so the only thing needed to take flight is your own transmitter, receiver and a small 2 sell lipo battery at 300mAh.

Features:
Easy to build
Powerful brushless 2S power system
Light density EPO foam construction..30% lighter than standard EPO
Plug and Fly version with motor ESC and servos
Large control surfaces ideal for aerobatic and 3D flight

Specs:
Wingspan: 580mm
Servo: 2.5g micro x 3 (included)
Motor: 1306-10 3100KV (included)
Flying Weight: 120~140g
Length: 690mm
ESC: 6A (included)
Propeller: GWS 6030 (included)

Included:
Mini Saturn Airplane (PNF)
All necessary hardware
manual

Required:
4CH transmitter and receiver
2S 7.4V 200~300mAh lipoly battery