Talk about a sexy looking MIG-29, this little guy is not so little, with a wing span of 960mm ( 37.7 inches), perfect fit for people with small cars, ( that would be yours truly ) it has enough room for two 68MM ducted fans for the ultimate speed. Im not a fan of EDF planes but dual EDF’s im assuming will produce enough power to enjoy this beautifully Composite fuse and balsa wings crafted covered high gloss paint finish and the wings superbly covered to match the fuse. Wings and tail is balsa construction while the fuselage is composite.
Just like the real Mig 29, this EDF jet promises to deliver high performance with high speeds with its 2x EDF units, with the right set up yet at the same time it has impressive slow speed performance. Remember, with any RC plane, specially Jets made out of balsa and composite, make sure you use high quality servos.
68mm High Performance EDF x 2
Your Own 6 Channel TX/RX
2 x 28mm EDF Motor (4s~6s)
2 x 60A~80A ESC
3 x 12g MG Servo, 2 x 26g MG servo
3000mAh~4000mAh 4s Lipoly x 2
i love this combination, a sailplane that is also a glider and a hotliner at the same time. With the right setup, you can sail the sky with or without wind, you can rip the sky like a hotliner or simply glide at will. This is a 69″ wingspan glider with some serious flying characteristics. The specs suggests to use a 3S lipo on a 1800kv outrunner motor, but i would use the MicroDAN 2505-2900 Kv outrunner on a 4S 1000mAh lipo and a 45Amp ESC, keeping the plane super light and at the same time powerful. a 5×5 prop will do or for more thrust, you can use an APC 6 x 4, 20200 RPM, 9.98V, 30A, 25oz Thrust.
Here are some pictures of the Samurai ARF RC Sailplane Glider Hotliner
Wingspan: 69 in.
Length: 41-3/4 in.
Wing area: 462 sq in.
Flying Weight: 33 oz. (with battery)
Fiberglass fuselage w/aluminum motor mount
Carbon fiber tailboom
Sheeted foam wings w/genuine Oracover
2820 Brushless Outrunner motor 1800kv
45A Brushless ESC
30mm Aluminum turbo spinner
10×6 Carbon filled prop blades Continue reading